|STLabs, an ATARI
16/32 computers hardware lab!
This page concerns
STDMAPLUS, a hardware upgrade designed for the
adding IDE and ETHERNET interfaces on the DMA port.
Authors: Frédéric Pécourt and Christian Zotier
STDMAPLUS CARD FEATURES
- Xilinx SPARTAN 3 FPGA
bridging the ST DMA port to two IDE buses and an ETHERNET controller
- ATA-IDE interface with two IDE
buses in DMA mode allowing up to three devices.
features a compact flash adapter
IDE1 features a conventionnal 40-pins IDE header with up to two devices
- DAVICOM 9000E ETHERNET adapter
for a 10Mbits/s TCP/IP link in DMA mode
- the card form factor makes it
on a suitable for the MEGA STE as it is directly compatible to the DMA
internal connector. It can also be externally connected to a normal
- IDE Boot Sector
- IDE block device driver similar to Atari AHDI or HDDRIVER
IDE device identification OK
ETHERNET chip register configuration OK. Link auto-negotiation not OK
contact : stlabs